3.6/6kv N2XSBY single core 120mm2 150mm2 xlpe insulated power cable Standards
IEC 60502 Part 2

3.6/6kv N2XSBY single core 120mm2 150mm2 xlpe insulated power cable Application
The single core cables are designed for distribution of electrical power with nominal voltage Uo/U ranging from 1.8/3KV to 26/35KV and frequency 50Hz. They are suitable for installation mostly in power supply stations, indoors and in cable ducts, outdoors, underground and in water as well as for installation on cable trays for industries, switchboards and power stations.

3.6/6kv N2XSBY single core 120mm2 150mm2 xlpe insulated power cable Construction

Conductor: Plain annealed copper or aluminium complying with IEC 60228 class 1 or 2. 
Conductor Screen: The conductor screen consists of an extruded layer of non metallic, semi-conducting compound firmly bonded to the insulation to exclude all air voids.
Insulation: XLPE

Insulaton Screen:  Double copper tape or copper wires applied helically with Copper tape
Separation Sheath (for armoured cable): The separation sheath comprises a layer of extruded PVC, PE or LSZH, applied under the armour .
Lapped Bedding : The lapped bedding consists of Polyester non woven fabrics .The thickness is1.5mm
Armour (for armoured cable): Galvanized steel Tape Armour.
Outer Sheath: PVC, PE or LSZH can be offered as an option

Installation and operation condition of cable
Operating Temperature:  up to 90°C
Short Circuit Temperature( 5 seconds maximum duration ): 250°C 
Bending Radius: 12 x OD
Current Rating Conditions:
Ground Temperature: 20°C
Ambient Temperature (air): 30°C
Depth of Soil: 0.8m

Thermal Resistance of Soil: 1.5K•m/W

3.6/6KV (Um=12KV) Power Cables Single Core Cables Dimensional Data: